مستخدم:VelazquezGilpin363

من موسوعة العلوم العربية
مراجعة 07:04، 3 مارس 2012 بواسطة VelazquezGilpin363 (نقاش | مساهمات) (أنشأ الصفحة ب'Rigs, or 18-Wheelers, are huge truck and trailers that weigh an common of 80,000 pounds. Their purpose is to haul heavy loads for lengthy distances. Skilled drivers of thes...')
(فرق) → مراجعة أقدم | المراجعة الحالية (فرق) | مراجعة أحدث ← (فرق)
اذهب إلى التنقل اذهب إلى البحث

Rigs, or 18-Wheelers, are huge truck and trailers that weigh an common of 80,000 pounds. Their purpose is to haul heavy loads for lengthy distances. Skilled drivers of these rigs are required to deliver those loads to a particular place on a distinct date. Their job is to stay alert and get the load to its destination on time.

Side collisions are one of the most standard accidents involving rigs. There are blind spots on the sides, in the front, and in the rear of rigs. The driver cannot see other vehicles when they are in those blind spots. Rig drivers must initial make a wide swing to the left in order to negotiate a perfect hand turn otherwise, the rigs tires would hit the curb or any other object that may be in the way. Accidents most often take place when there is a automobile in their blind spot and, when the driver pulls the rig to the left to make the suitable hand turn, hits the car and pushes it into a curb, off the road, or into oncoming visitors. This kind of accident can also happen at higher speeds when the driver of a rig modifications lanes on a highway but does not see a car in its blind spot.search engine

Jackknifing is one particular of the most risky sorts of accidents. This occurs when the weight of the trailer pushes the cab around until it is facing backwards. Even though this is happening, the trailer swings out of control into the road where it will smash into any other vehicles in its path. These forms of accidents usually occur when the roads are slippery, commonly due to rain or snow and ice.

Rear-end accidents are also popular. Rigs are rather heavy and it takes them a lot longer to stop than it does an average vehicle. If there is not enough distance between the rig and the vehicle in front of it for the driver to stop, the rig will crash into the back of that vehicle. These accidents typically happen due to driver error. Injuries and deaths are high in accidents of this kind.

One more frequent accident involving rigs are rollovers. Rigs have a high center of gravity and rollover very easily. The most frequent cause is drivers that go into curves or turns to rapidly for road conditions. When this occurs, the rig will slide into or rollover on any object in its path, which includes other vehicles.

The leading contributing causes of these accidents, according to the Federal Motor Carrier Safety Administration, is driver error due to fatigue, inattention, and use of prescription or more than-the-counter drugs. Other causes include aggressive driving, such as tail gating or speeding, and improperly loaded cargo. Though the majority of rig drivers are specialist and practice safe driving, accidents do happen.